Septic | System | Components | Djs Affordable Contractor | United States

What are the approved septic system components?

The Septic System Process

Certainly! Installing a septic system can be a complex task, but with the right guidance, it’s possible to do it yourself.

Here are the general steps for a gravity-fed septic system installation:
  1. Prepare and Design Your System:
  2. Perform a site survey to assess available space, topography, and intended water use.
  3. Conduct a percolation (soil) test to determine soil type, drainage capacity, and filter capabilities.
  4. Design the system based on survey findings and soil test results.
  5. Obtain necessary permits and approvals, watch the video to get an understanding of the process for installing a septic system.  (Click Here)
Remember, septic system installation involves legal and environmental considerations, so it’s essential to follow local regulations and seek professional advice if needed. Therefore in Virginia please consult the below link.


If you still need help in your project, please reach out to Djs Affordable Contractor.


    • Related Articles

    • What is and how to choose the best location for a septic tank?

      Septic Tank Introduction A septic tank should be installed on high, even ground that's free of any dense root systems. Avoiding slopes and steep declines will prevent flooding. Depending on the size of the tank installed, (which is determined by the ...

    • What Could Cause Your Air Conditioner to Leak Water?

      Air conditioning leaks can be frustrating. Not only are they messy, but they can potentially cause significant water damage to your home. Infact, these “small” inconveniences can sometimes lead to big problems. Common Causes of AC Water Leakage ...

    • What are some of the major components of a Roof?

      Understanding the Components of Your Roof Do you know what goes into installing the roof above your head? Whether you’re thinking about replacing your roof or just wondering about the one you have, understanding your roof’s components will help you ...

    • How to check to see which boot mode your computer is in?

      The following steps will take and show you which BIOS mode your computer is operating. Step 1. Please press the Windows Key + R keys at the same time and when the run box appears type MSInfo32 in the box and hit Enter. Step 2. This operation will ...

    • Can sediment filters be installed between the pump and pressure tank?

      Proper Placement of Sediment Filters between the Well Pump and Pressure Tank in a Water System Yes and No, sediment filters can indeed be installed between the pump and the pressure tank. The placement of this filter seems to be quite the idea common ...